Thermal Conditioning | Temperature Conditioning System | Thermo Cycling | Temperature Test Systems | Environmental Test Chamber | Environmental Stress Screening
An Evolution in Thermal Conditioning
ThermalAir TA-5000A Series of Temperature Test Systems
The ThermalAir TA-5000A is a compact, portable bench top environmental heating and cooling temperature forcing air stream system.
Download the Datasheets

Temperature Conditioning System
Instead of taking your parts that need temperature conditioning to an large oven or large environmental test chamber, our thermal test system allows you to perform your temperature profiling right where you need it – at your test bench, on your production floor or in your test laboratory.
Some Applications:
- Failure Analysis Testing
- High Temperature Testing
- Low Temperature Testing
- Product Engineering
- Back-End Test
- Incoming Inspection
- IC Handler Verification
- Functional Test
- Cooling the IC while Stress Full Cycle
- Environmental Stress Screening
ThermalAir Temperature Cycling Test Systems
The ThermalAir TA-5000 series of products have a wide range of temperature test capabilities. Benchtop -40°C to +80°C applications to temperature cycling -100°C to +300°C environmental stress test. The TA-5000 series are used for temperature testing in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic – non-electronic components and other parts and assemblies.

TA-5000A with Hood

TA-5000A with Clamshell & Flex Hose
ThermalAir TA-5000A
Dimensions & Working Height





Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
Plug & Play Remote
No need to rewrite test programs
IEEE.488 / RS-232
Compatible with Legacy Products
Download the Datasheets
Two Color Touch Screen Displays
The ThermalAir TA-5000A has a front panel display and a thermal head display. The thermal head color touch screen gives the user the ability to set temperature parameters and monitor all system operations at the test site location.
Download the Datasheets
Specification Features & Benefits
- Ultra Cold Temperatures maintained at 50&60Hz
- Dual Touch Screens Front Panel & Thermal Head
- Plug-in anywhere from 200~250VAC, 1Ø
- ECO Smart DC system for up to 50% energy saving
- No voltage configuration to use at different locations
- Versatile Boom & Stand – Extended reach standard
- SSD for thermal file management and data logging
- Control Heated dry air purge for frost free operation
- One touch Temp Cycle, Ramp, Soak and Dwell
- Ultra low audible noise for quiet engineering lab use
ThermalAir TA-5000A Head with Glass Chamber
Outputs a controlled clean dry thermal air stream directly on your test part
OUTPUT TEMPERATURE CONTROL
ThermalAir can control by user setting, the ramp rate, temperature transition time as fast as -55°C to +125°C in less than 10 seconds.
HOW DOES IT WORK
The TA-5000’s built-in air dryer and filtering system sends clean dry air (CDA) through its powerful internal chiller / heat exchanger to delivers hot & cold temperatures from -100°C up to +225°C.
User can control flow rate from 5 to 24 SCFM. The ThermalAir temperature system is all self-contained. You just plug it in and it’s ready to start thermal testing your parts. [No configuration required].
The main temperature control of the TA-5000A is at the temperature thermocouple in the output gas nozzle. This is AIR MODE temperature control. The TA-5000A has a thermocouple imbedded in the tip of the output gas nozzle and needs no additional attached thermocouple sensors to control temperature of the ThermalAir system.
The TA-5000A has several ways to control temperature. The thermal stream system uses external thermo couples. The most common temperature thermo couple input temperature sensors the thermal stream using are T-Type & K-Type thermo couples. The MPI ThermalAir system also has multi-channel (resistance temperature detectors) RTD and Diode inputs for precise temperature control of the thermal stream system.
Download the Datasheets
Environmental Test Chambers | Temperature Conditioning Systems| Temperature Cycling Test | Thermal Conditioning Systems | Semiconductor IC Final Test
System Performance
- Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
- Typical Temperature transition rate: -55° to +125°C: approximately 10 seconds +125° to -55°C: approximately 10 seconds
- Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
- Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
- Temperature set, display and resolution: ±0.1°C
- Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
- Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
ThermalAir TA-5000A Accessories
Design for Performance
Semiconductor IC devices on the test bench top setup in an engineering product development environment.
MPI ThermalAir temperature forcing systems provide a direct thermal stream of clean dry hot and cold air directly to the part that needs to be thermal tested. Environmental stress screening, temperature conditioning, thermal shock and other temperature test requirements is that the ThermalAir temperature systems bring to the test.
ThermalAir Configurations & Chambers





Environmental Test Chambers | Environmental Stress Screening | Temperature Profiling | Temperature Conditioning | Thermo Cycler | Temperature Cycling Test

Front Panel Touch Screen Display
User Friendly Interface enables end users to control temperature, set parameters, ramp, cycle and soak with a single tap.
Download the Datasheets