ThermalAir TA-1000B Rack Mount Test System
ThermalAir Series Temperature Forcing System
The ThermalAir TA-1000B high capacity thermal air stream system is used for temperature testing, fast thermal cycling, and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperature from -25°C to +200°C.
An Evolution in Localized Temperature Testing Equipment
-25°C to +200°C
Temperature Testing Systems | Thermal Cycling Test Systems | Environmental Testing Systems | Temperature Simulation Testing | Thermal Test Equipment | Thermal Cycling Test Equipment
Compact! Plus Performance!
TA-1000B temperature range -25°C to +200°CÂ
- Eco-Friendly with up to 50% power energy savings
- Ultra-stable DC temperature control with Smart DC Inverter chiller
- Color touch screen display GUI. The front panel touch display
- Easy touch icons for convenient user operation and intuitive menus
- Output Flow rate 4 to 12 SCFM ContinuousÂ
- No voltage or frequency configuration needed – one system worldwide
- Quiet low audible noise for engineering laboratory
- No LN2 or CO2 required [ Built in Chiller ]
Thermal Cycling Test Solutions
TA-1000B square chassis for 19 inch rack mount requirement with 6 ft. output hose from the front panel.
TA-1000B Rack Mount Temperature Test System
Ultra cold temperatures are maintained at 50Hz or 60Hz.
The systems touch screen lets operator control temperature settings, ramp and cycle right at user test bench workstation.
Plug-in anywhere from 185 to 250 VAC. No need for user voltage re-configuration when system moved to different locations.
USB and SSD for thermal file management and data logging.
A separate temperature-controlled dry air purge keeps the surrounding test area frost-free operation during long test time at extremely cold temperatures.
Two User Control Modes – Standard Operator & Temperature Cycle (Temp Cycle, Ramp & Soak)
User Interface and Operations – Remote Control Compatible Modes for existing user test programs.
  – Center Control Color Touch Screen Display
  – IEEE-488.2 (GPIB), USB, Ethernet, Serial, LXI
  – Intranet via LAN
  – LabVIEW drivers
The TA-1000 provides temperatures from -25°C to +200°C ThermalAir Desktop System
MPI ThermalAir TA-1000 gives the user full temperature control and portability. The system includes full GUI touch screen display, remote user interface rear panel, front output gas hose and microscope style Thermal Head and Hose arm and stand.
T-Type and K-Type Thermocouple DUT temperature control sensor inputs on the rear panel.
Basic system includes all you need to meet your temperature testing requirements.
TA-1000 Remote InterfaceÂ
– IEEE-488.2(GPIB)
– RS-232 SerialÂ
– USB
– Ethernet :Â LAN/LXI
– LabVIEW drivers
19 inch rack mount system configuration AvailableÂ
Temperature Testing Systems | Thermal Cycling Test Systems | Environmental Testing Systems | Temperature Simulation Testing | Thermal Test Equipment | Thermal Cycling Test Equipemnt
Microscope Style Integraded Arm & StandÂ
Plus Glass Cap Accessories
The flexible Microscope Style Arm & Stand can be use mounted to the TA-1000B or it can used separately.
The TA-1000B Arm & Stand holsters the systems thermal head and thermal glass cap
The system has a high temperature 3.28 inch I.D double pane glass cap enclosure
The TA-1000B includes a rear 6 ft. output flex hose
Two User Control Modes – Standard Operator & Temperature Cycle
(Temp Cycle, Ramp & Soak)
The Microscope Style Arm & Stand positioning is versatile and is manually adjusted to accommodate most test setups
Download the Datasheets
Temperature Forcing Systems | Thermal Test Systems | Environmental Test Chambers | Temperature Cycling Test | Thermal Test Equipment | Thermal Shock
ThermalAir Color Touch Screen GUI
6 Users Friendly Easy Icons
-
MAINÂ Users Defined Preset Temperature Settings
-
CYCLEÂ Hot/Cold Temperature Cycle User Profiles
-
SETUP Save/Load Temperature Parameters
-
UTILITIES Configuration, Calibration & Diagnostics
-
REVIEW Real-time & History – Full Temperature Graphs
-
DATALOG Â Chart Time & Temperature to USB
ThermalAir TA-1000B Dimensions & Working Height
ThermalAIr TA-1000B Microscope Style Arm & Stand can be easily integraded to the top of base unit and a 330mm(13.0″) x 330mm (13.0″) base plate is included for standalone operation
Temperature Simulation Testing
Temperature cycling, thermal profiling and other environmental temperature conditioning is why MPI Thermal systems are part of the manufacturing temperature test processes.
MPI Thermal TA-Series of thermal air steam temperature forcing systems provide a wide variety of hot and cold temperatures in order to simulate at the point of test.