Aerospace Defense
 Temperature Forcing Systems & Thermal Cycle Test for Extreme Environments
Environmental Stress Screening Solutions
The aerospace and defense industries has experienced a boom over the recent years,
and the need for safe, quality components and products is now a heightened priority.
 Temperature Testing from
Thermal Shock – Thermal Cycling Test for Polymer Composites – Temperature Test Chambers – Thermal Test Temperature Simulation – Temperature Testing Chamber
Temperature Simulation & Test Solutions
MPI Thermal cutting-edge technology allows testing with temperatures speeding to super-fast ramp rates and temperature cycling for MIL-STD -55°C to +125°C. MPI ThermalAir systems can ramp in just seconds, not minutes.
This new thermal test technology gives the end user the ability to easily control the ramp rate speed with one touch temperature set point functions.
The ThermalAir systems to bring hot or cold temperature directly to your electronic and non-electronic parts. This enables you to bring the temperature to the test station in the engineering test lab and manufacturing test on the production line.
This is why the ThermalAir Temperature Test Systems and Environmental Test Chambers are part of the thermal test process.
Aerospace & Defense Test Applications
To ensure successful operation, Aerospace & Defense programs subject hardware and electronics to extensive ground testing. Thermal cycling tests ensure the performance and operation of units, subsystems, sensors, payloads, and space vehicles in extreme thermal environments. At the unit level, these tests include thermal cycling tests and thermal vacuum tests. At the space vehicle level, they include thermal cycling, thermal vacuum, and thermal balance tests.
The ThermaAir thermal forcing system provides environmental stress testing capabilities that allows scientists and engineers to perform rapid thermal cycling simulations of materials, electronics, and sensors ensuring thermal resistance in the most extreme temperature environments. This is why the ThermalAir Temperature Forcing System and Environmental Test Chambers are part of the thermal cycling test process.
Thermal Shock – Thermal Cycler – Test Chambers – Thermo Cycling Test – Thermal Cycling Test CFRP Composites
Aerospace/Defense Applications and Test Processes which require Environmental Stress Testing
MPI Thermal test systems meet MIL-STD-883 standards. Our ThermalAir products provide uniform methods to generate hot and cold temperature for mil aero temperature range of -55°C to +125°C.ThermalAir TA-5000 system controls temperature for testing microelectronic and other electronic and non-electronic materials. This assures your parts are suitable for use within military and aerospace electronic systems. These tests include basic environmental tests to determine resistance to the deleterious effects of natural elements and conditions surrounding military and space operations.
Test your electronic and non-electronic assemblies at temperature quickly and conveniently directly at the bench top or test station.
- Environmental Stress Testing
- Thermal Cycle Test
- Thermal Shock Test
- Simulation Testing
- Fatigue Life Prediction
- Rapid Thermal Cycling
- Accelerated Life Testing
- Failure Analysis Test
- Thermal Interface Materials Testing
Environmental Stress Screening Solutions
Today’s High Tech Companies are developing Technologies and Systems to transport future explorers to multiple destinations, each with its own unique – and extreme – space environment. To prepare for these complex missions, engineers and scientist need to rigorously test electronic and non-electronic components for extreme temperatures and rapid thermal changes.
MPI ThermalAir temperature forcing systems provide a direct thermal stream of air to your test interface at a temperature range from -100°C to +225°C. Bring temperature right at your test station, localizing the test for temperature conditioning, thermal shock, environmental stress test, and other temperature test requirements.
Environmental Temperature Stress Testing
Precision Temperature Forcing Systems use a direct temperature-controlled stream of hot or cold air to provide a precise thermal environment for temperature testing, temperature conditioning, and thermal cycling of electronic and non-electronic assemblies and sub-systems. The ThermalAir temperature test system enables the test. This allows you to perform temperature simulation tests in situ, at a specific location, at your tester station, test bench or directly on the unit under test.
Bring the temperature to your test for Aerospace and Defense applications for the mil aero MIL-STD 883 temperature range of -55°C to +125°C
Download the Datasheets
Thermal Cycling Test
MPI Thermal Test Systems help military equipment manufacturers and defense contractors meet the stringent standards required developing and manufacturing quality electronic assemblies for military electronics, defense electronics, aerospace/NASA, and other government entities.
The Thermal Cycling Test processes can be accomplished with our ThermalAir System. Ramp, Cycle, Dwell and Soak times are fully programmable with a touch of a button. The ThermalAir system allows you to generate very precise controlled temperature for simulation in Thermal Shock Test, Temperature Conditioning, Environmental Stress Screening, Temperature Cycling and more.
Aerospace & Defense
Require Ultimate Hot & Cold Temperature
Aerospace & Defense industries test parts at MIL-STD-883 method(s) -55°C to +125°C
Aerospace & Defense industries test parts at MIL-STD-883 method(s) -55°C to +125°C
The ThermalAir TA-5000 provides ultimate Hot and Cold temperatures from -80°C to +225°C. This is in order to get components to MIL SPEC temperatures quickly.   The MPI ThermalAir stream system can bring these temperatures to the test station instead of taking the test unit and devices to a fixed large temperature test chamber. All Thermal Air Streams provide localized temperature to the test fixture for dynamic testing at the required temperature setting for the test.
Environmental Stress Testing
Environmental stress conditions such as radiation exposure, temperature extremes, vibration, and dirt encountered by the military, on factory floors, and under the hoods of automobiles, these semiconductor devices need to keep working. To assure quality and reliability of electronic devices, semiconductor manufacturers need to simulate harsh environments during the engineering and production test stage. This is why the MPI Thermal TA-5000 Series ThermalAir temperature test products are part of the test.
ThermalAir Systems for Aerospace & Defense
Aerospace/Defense Application and Test Processes which Use Temperature
The ThermalAir system allows you to generate very precise controlled temperature for simulation test in Thermal Shock, Temperature Conditioning, Stress Screening, Temperature Cycling and more. Thermal test processes can be accomplished with our ThermalAir system. Ramp, Cycle, Dwell and Soak times are fully programmable with a touch of a button.
Temperature Forcing System
MPI ThermalAir temperature forcing systems provide a direct thermal stream of clean dry hot and cold air directly to the part that needs to be thermal tested. In the lab or on the production floor, ThermalAir Series provide unparalleled thermal stress testing  capabilities for scientist and engineers.
The ThermalAir system allows you to generate very precise controlled temperature for simulation test in Thermal Shock, Temperature Conditioning, Stress Screening, Temperature Cycling and more. Thermal test processes can be accomplished with our ThermalAir system. Ramp, Cycle, Dwell and Soak times are fully programmable with a touch of a button.
