End Effector Robotic Thermal Tester – Thermal End Effector – Thermal End Effector – End Effector Test – End Effector Robotic Thermal Tester – End Effector

Robotic Thermal Test Systems  – Thermal End Effector

 Thermal End Effector –  Temperature Cycling Test –  Rapid Temperature Test –  Thermal Cycling Equipment – Temperature Forcing Systems

Robotic Thermal Test Systems  – End Effector Test


Thermal End Effectors

The ThermalAir TA-5000/TA-3000 series has a wide range of accessories that are attached to the ThermalAir Stream Arm and Flex Hose located at the end of Thermal Head output gas nozzles.

They incorporate an intuitive full funtion for the ThermalAir users with the flexibility to accurately test in a variety of ways at the thermal test workstation.

The TA-5000A/TA-3000A can also be used with an Thermal End Effector adapters interfaced to the end of Thermal Head Arm and Stand, designed to adapt to the end users device under test. The exact use of this device depends on the users thermal test application.

Customize Your Temperature Testing Application

Thermal Cycle Test System
Thermal Cycle Test System

 Temperature Testing –  Thermal Test Systems –  Thermal Testing Solutions –  Thermal Shock –  Thermo Stream

TA-5000A with Thermal End Effectors

 

OUTPUT TEMPERATURE CONTROL

ThermalAir TA-5000A can control by user setting, the ramp rate, temperature transition time as fast as -55°C to +125°C in less than 10 seconds.

 

HOW DOES IT WORK

The TA-5000’s built-in air dryer and filtering system sends clean dry air (CDA) through its powerful internal chiller / heat exchanger to delivers hot & cold temperatures from -80°C up to +225°C.

User can control flow rate from 4 to 24 SCFM. The ThermalAir temperature systems are all self-contained. You just plug it in and it’s ready to start thermal testing your parts. [No configuration required]

Download the Datasheets

 

 

End Effector Robotic Thermal Tester – End Effector – End Effector Robotic Thermal Tester – Robotic End Effector – Robot End Effector – Robotic End Effector

Customize Your Temperature Test Applications

The TA-5000A can also be used with an Thermal End Effector adapters interfaced to the end of Thermal Head Arm and Stand, designed to adapted with the end users device under test. The exact use of this device depends on the users thermal test application.

  • Eco-Friendly with up to 50% power energy savings
  • Ultra-stable DC temperature control with smart DC energy efficient chiller
  • Built-in color touch screen display GUI. The front panel touch display easyicons makes for convenient user operation and intuitive user friendly menus
  • No voltage or frequency configuration needed– one system worldwide
  • Quiet low audible noise for engineering laboratory
  • No LN2 or CO2 required [ Built in Chiller & Air Dryer ]

Thermal Cycling Test Solutions

Temperature Testing System | Thermal Test System | Thermal Cycling Test

Customize Your Test Application
with Thermal End Effectors

Thermal End Effector I-Purge Adapter – Easy Set-up

The ThermalAir TA-5000A/TA-3000A Systems can be used with a Thermal End Effector adapter interfaced to the end of Thermal Head Arm and Stand (no tools required), designed to adapt to the end users device under test. In 30 seconds, users will be ready to temperature test any types of parts or test articles. The exact use of this device depends on the user’s temperature test application.

Bring Precise Temperature Directly to the Test

 Thermal Test Systems  –  Thermal Test Systems –  Temperature Testing Chamber –  Thermal Shock –  Temperature Test Chambers

Thermal Glass Cap  Enclosures & Thermal End Effectors

The TA-5000A can be used with an array of Thermal Glass Caps and Thermal End Effector adapters interfaced to the end of the Thermal Head Arm and Stand. These

TA-5000A accessories are designed to adapt with the end users temperature test application and the DUT (device under test). The size and shape of the Thermal Glass Cap selected and depends on the users thermal test application.

The TA-5000A has many size thermal glass caps, thermal shrouds and custom Compact Chambers

Thermal End Effector I-Purge Adapter – Easy Attachment

This video shows the easy setup and adjustment of Thermal End Effector – i-Purge Adapter to the end of Thermal Head without any tools required.

Whether the users are testing semiconductor devices, sensors, fiber optics, microwave RF hybrids, or any type of test articles, the ThermalAir Accessories can connect to end user’s test setup in a variety of ways to bring temperature capabilities directly to your test bench top or test station.

Temperature Test Solutions for Today’s Environmental Testing Demands

ThermalAir TA-5000A Accessories

Temperature Conditioning Chambers | High Temperature Glass Test Chambers

High Temperature Glass Chambers

Rectangular & Square Thermal Glass Cap Chambers | Temperature Conditioning Chambers

Rectangular & Square Thermal Glass Cap Chambers

Conductive & Non-Conductive High Temperature Shroud kit | Thermal Conditioning Chambers

Conductive  & Non-Conductive
High Temperature Shroud kit

Environmental Test Chamber |Temperature Conditioning Chamber

Compact Chamber Clamshell Model

Test Chamber Accessories

Flex Extender Air Transfer Hose
2Ft., 4Ft., 5Ft., 6Ft. Length
(Custom lengths available)

Temperature Test Enclosure

Compact Chamber Hood Model

error: